Select Page

Fluid Handling

Centrifugal Pumps

Centrifugal Pumps

Heavy-duty centrifugal pump. Transport water and other non-aggressive chemicals. Delivers process water to heat exchangers, air scrubbers, spray systems and 030A other process/pilot plant equipment. Available with close couple motor or pedestal mounted for direct and...

Centrifugal Pumps (High Capacity)

Centrifugal Pumps (High Capacity)

Constructed of 316 stainless steel. Can be specified for spray washers, scrubbers, leach circuits, and other chemically compatible systems. Motors close coupled, TEFC, seals are viton, teflon, carbon, or ceramic. Provision for seal flush water is available. Chemical...

Diaphragm Pump

Diaphragm Pump

Positive displacement pump for metering up to 4 GPM of liquids and slurries. Will deliver to 9M of TDH. Manual stroke adjustable capacity. Corrosion resistant 030B pump, a neoprene diaphragm, and PVC pump housing and check valves. Dimensions: 94cm L x 33cm W x 46cm H....

Mega Slurry Pump

Mega Slurry Pump

The Mega Slurry is a high-performance, low maintenance slurry pump recommended for coarse or fine particles from solids-laden waste water to aggressive slurries of an abrasive and/or corrosive nature. Capacity of pump is up to160 GPM @ 100 Ft. TDH. Impeller, chamber...

Metering Pump – Diaphragm Type

Metering Pump – Diaphragm Type

BW. Precise feed control of liquids, powered by a permanent magnet motor with a solid state controller. Pump heads are machined of 030B acrylic, polypropylene, or polyethylene. Diaphragm is teflon coated Buna and the 0-ring is made of viton. 030B-110 | PTFE Diaphragm...

Peristaltic Pump

Peristaltic Pump

Variable speed, pumps use tubing assembly of short length with two quick connector ends. Specify tygon or norprene tubing material. Pump supplied with two tubing assemblies and 152cm of vinyl suction tubing and polyethylene discharge tubing. Optional accessories...

Vertical Centrifugal Sand Pump /Sump (Pilot Size)

Vertical Centrifugal Sand Pump /Sump (Pilot Size)

The Vertical Centrifugal Sand Pumps are designed for pumping abrasive slurries. They handle intermittent or varying feed, are well suited for pilot plant applications for pumping slurries, since the feed to the pump may either be introduced into the top of the 4...