HP Furnaces

SEPOR, INC
718 N FRIES AVE.
WILMINGTON, CA 90744
310 830 6601
Fax: 310 830 9336
info@sepor.com

Catalog Number | 090E

 

Unique Door Design

  • Unique door mechanism provides safe, easy door operation.
  • Door is spring loaded to assist in easy opening and closing.
  • The movement keeps the hot surface of the door away from the operator, avoiding excessive heat upon opening.
  • Self-aligning door seal is incorporated to minimize heat loss and increase chamber uniformity.

Interchangeable Control Modules

  • Programmable control modules are interchangeable to allow operator flexibility and ease of access if interchanging is needed.
  • Simply remove control module from sleeve and insert the other controller.
  • Requires no rewiring or disassembling.

Fast Heat-up

  • The furnace can reach 1600°C in approximately 40 minutes (see graphs).
  • Heat-up rate allows for optimum element life.
  • Faster heat-up rates may endanger SuperKanthal 33 elements.

Air Ventilation

  • Continuous air circulation maintains cool case temperature of 50°C at maximum chamber temperature of 1700°C and ensures longevity of electronic components.

Unitized Controller

  • The combination of chamber and controller requires only one electrical hook-up and saves bench space.

Inert Atmosphere

  • Two inert gas injection ports: one on top of the unit and one on back.
  • Ports are 0.38″ (0.95 cm) diameter and are supplied with plugs.
  • Units are supplied with hearth plates.

Operation

  • All D1 and E1 controllers have RS232 digital communications as standard feature.
  • No power cord supplied.
  • Electrical connection requires fixed wiring.
  • Extremely reliable control units are backed by a 24 month warranty.
  • Choose from three distinctive applications-oriented temperature controllers:
  • – C1: Digital programmable control with one stored program of 8 segments.
  • The furnaces that use this control also utilize a mechanical Over Temperature Protection relay.
  • – D1: Digital programmable control with 4 stored programs, 16 segments per program.
  • The controller also includes RS232 communications.
  • The furnaces that use this control also utilize a mechanical Over Temperature Protection relay.
  • – E1: Digital programmable control with 20 stored programs, 16 segments per program.
  • The controller also includes RS232 communications.
  • The furnaces that use this control also utilize a mechanical Over Temperature Protection relay.

Applications

  • – This 1700°C furnace is ideally suited for wide variety of high temperature applications:
  • Composite research.
  • Precious and exotic metals treatment.
  • High temperature ceramic research.
  • Powder Metallurgy.

furnaces