Gyratory Sieve Shaker

 

SEPOR, INC
718 N FRIES AVE.
WILMINGTON, CA 90744
310 830 6601
Fax: 310 830 9336
info@sepor.com

Description:

The Gyratory Sifters are designed for laboratory or quality control testing, where accurate and reproducible results are important. The 8” Gyratory Sifter uses standard 8” lab sieves and has a capacity for 8 full height or 16 half height. These lab sifters must be suspended from either a ceiling or a stable overhead support. They are popular for wet sieving, which requires the purchase of the optional wet sieve kit, pictured below.

Construction:

The 8” Gyratory Sifter has a 1/6 HP/110 V/1 Ph/60 Hz or 1/6 HP/220 V/1 Ph/50 Hz motor and drive.

 

 

Wet Sieve Kit

Spray Cover

Drain Pan

Catalog NumberDescriptionShip Weight
040B-0218” Gyratory Sieve Shaker55 Lbs
040B-023Wet Sieve Kit For 8” Sieve Shaker15 Lbs.

 

This gyratory sieve shaker is primarily used for wet sieving, and most labs will place a 5 gallon bucket beneath the drain pay, with rubber tubing attached, to capture the fines and water. Then, the fines will be de-watered in a 11.5 gallon pressure filter, or a 3 gallon pressure filter, depending upon the volume of liquid present.

Print Friendly, PDF & Email