Grinding Ball Mills


310 830 6601
Fax: 310 830 9336


Vibro-Energy Grinding Mills are the most versatile line of mills available today for fast, low-cost particle size reduction to sub-micron range. Vibro- Energy grinding action achieves higher output per input horsepower; precise control of size and dis- tribution. Product contamination from media and lining wear is virtually eliminated. Maintenance costs are low because of few moving parts and replaceable linings made of abrasion-resistant metal, ceramic or elastomers.

Vibro-Energy Mill’s unique vibratory motion, coupled with the use of cylindrical media, allows a dense packing of the media bed assuring maximum media surface contact and minimum void area when operated under a low energy condition. Feed materials as large as 300 microns can be reduced to sub-micron sizes.

In the high energy configuration, feed materials as large as twelve inch agglomerates have been successfully milled and solid particles of a half inch are being reduced to a d50 of less than 5 microns.

The low energy condition (Low Amplitude Mills) is reserved for wet milling whereas the higher energy mode (High Amplitude Mills) can be used either wet or dry. The M-18 through M80 Series are Low Amplitude, designed for wet grinding. The DM Series of mills are high energy for wet or dry grinding.

Catalog NumberDescriptionShipping WeightShip Volume
010E-170M-18-5, 1-5 pints capacity250 Lbs27 CuFt
010E-171M-18, 2.6 gallon capacity250 Lbs27 CuFt
010E-173DM-1, 1.3 gallon capacity230 Lbs,27 CuFt
010E-172M-45, 27 gallon capacity2,200 Lbs.150 CuFt
010E-174DM-3, 4 gallon capacity500 Lbs.80 CuFt
010E-175DM-10, 13 gallon capacity1,100 Lbs.125 CuFt

Dm-1 & M18 are available in 110 V-220 V/1 Ph; All other mills are 230, 460 or 380 V/3 Ph


Print Friendly, PDF & Email