Electric Economy Assay Furnace

SEPOR, INC
718 N FRIES AVE.
WILMINGTON, CA 90744
310 830 6601
Fax: 310 830 9336
info@sepor.com

 

Description:

This series of electric assay furnaces is capable of operating up to 2,300o F (1,260o C). They have a single set point digital display controller , a heat indicating pyrometer with infinite switches, pilot light, standard left hand open door design, 6 foot power cord and a hearth plate.

An optional fume ventilation hood (shown in photo) is also avail- able. These furnaces are constructed to meet quality standards, insure firing efficiency and reliability. The furnaces include a stainless steel case with heavy duty angle iron frame, interior walls of 2,300 degree F insulating fire brick, 2,000 degree F back-up insulation, Kanthal heating elements, plug type door, solid arch plate to prevent brick dust from contaminating material being heated and efficient fast firing at a low amperage.

The standard electrical configuration is for 240 V/3 Ph/60 Hz. However for the small furnaces, 120V/1 Ph/60 Hz operation is available. The furnaces are also available for 220V/3 Ph/ 50 Hz operation. Optional ventilation hood is available.

 

Catalog Number Inside Dims
(W x D x H)
Outside Dims
(W x D x H)
Cubic Feet Weight
(lbs.)
Volts Amps Watts
090F‐025 9″ x 10″ x 6.5″ 17″ x 19″ x 23″ 0.34 95 240 15 1800
090F‐026 9″ x 10″ x 6.5″ 17″ x 19″ x 23″ 0.34 95 120 15 1800
090F‐027 12″ x 12″ x 8″ 20″ x 21″ x 24″ 0.75 140 240 20 3600
090F‐028 16″ x 16″ x 11″ 24″ x 25″ x 27″ 1.4 190 240 20 4800
090F‐110 24″ x 24″ x 30″ 42″ x 34″ x 58″ 10 850 240 65 15600
090F-050 VENT 15
Print Friendly, PDF & Email